Display Assembly - HP Chromebook x360 14 Maintenance And Service Manual

Display assembly

Description
Display assembly
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery (see
Remove the display assembly:
1. Disconnect the display cable (1) and the touch control cable (2) from the system board.
2. Disconnect the antenna cables from the WLAN module (3).
3. Remove the display cable from the routing channel in the computer (4).
4. Remove the antenna cables from the routing channel in the computer (5).
5. Position the computer with the keyboard facing downward and the display open 90 degrees and hanging
over the edge of a table.
6. Remove the four Phillips M2.5×6.0 screws (1) that secure the display to the computer.
28 Chapter 5 Removal and replacement procedures
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page 20).
Spare part number
L36904-001
18).
18).