Specifications - Sony SA-WM40 Marketing Operating Instructions Manual

Specifications

For the U.S.A. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, from 20 – 170 Hz; rated 120 watts,
minimum RMS power, with no more than 0.8 % total
harmonic distortion from 250 milliwatts to rated
output.
System
Type
Active Subwoofer (magnetically shielded design)
Speaker unit
Woofer: 30 cm dia. (12 in.), cone type
Continuous RMS output
European model (DIN)
120 W
Australian model (0.8%)
100 W
Other models (0.8%)
120 W
Reproduction frequency range
20 Hz – 170 Hz
High frequency cut-off frequency
50 Hz – 170 Hz
Phase selector
NORMAL, REVERSE
Inputs
Input jacks
LINE IN: input pin jack
SPEAKER IN: input terminals
Output jacks
LINE OUT: output pin jack
SPEAKER OUT: output terminals
General
Power requirements
European model
220 – 230 V AC, 50/60 Hz
Australian model
220 – 240 V AC, 50/60 Hz
Other models
120 V AC, 60 Hz
Additional Information
11 GB