Honda CRF150L Owner's Manual page 60

Engine Oil Changing Engine Oil
u
Changing Engine Oil
Changing the oil requires special tools. We
recommend that you have your motorcycle
serviced by your dealer.
If the engine is cold, idle the engine for 3
1.
to 5 minutes.
Turn the ignition switch to the
2.
position and wait for 2 to 3 minutes.
Place your motorcycle on a firm, level
3.
surface.
Place a drain pan under the drain bolt.
4.
Remove the oil fill cap/dipstick, drain bolt
5.
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
56
(Off)
Install a new sealing washer onto the
6.
drain bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Sealing washer
Drain bolt