Honda CRF150L Owner's Manual page 83

Installation
Attach the right and left side collars in
1.
their original locations on the wheel.
On the left side, place the wheel between
2.
the fork legs and insert the front axle
shaft, through the left fork leg and wheel
hub.
Avoid scratching the brake pads, carefully
u
fit the brake disc between the pads.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Install and tighten the front axle nut.
3.
Torque: 69 N·m (7.0 kgf·m, 51 lbf·ft)
Tyre Puncture
After installing the wheel, apply the brake
4.
lever several times and then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Removing Wheels
u
Continued 79