Honda CRF150L Owner's Manual page 85

Remove the brake caliper bracket, rear
7.
wheel and right and left side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not push the brake pedal while the
u
rear wheel is removed.
Tyre Puncture
Installation
To install the rear wheel, reverse the
1.
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
Removing Wheels
u
Continued 81