Svt-5050P - Sony CCTV Systems Catalog

TIME LAPSE VIDEO RECORDERS
Time Lapse Videocassette Recorder

SVT-5050P

•12 different time lapse recording/playback modes are
available in addition to the standard mode (3 hours
time mode) with a normal 180-minute tape
TIME MODE (h) 3 12 24
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14 1.62 2.42 3.22 4.82 6.42
Note: In time lapse modes, it is possible to additionally record three hours longer than the original modes.
•Adaptive Picture Control (APC) delivers optimum
picture quality to the recording image
•A tape recorded in the 3-hour mode can be played
back by any VHS VCR
•Audio recording and playback are possible in 3,12 and
24-hour modes
•Built-in time and date generator allows a required
scene to be easily searched by presetting the desired
time and date
•Multiple recording modes such as Auto Repeat
Recording, Timer Recording, Alarm Recording, One-shot
Recording and Series Recording for versatile situations
•Holiday setting function
•Daylight Saving Time setting function
•Quick recording check function
•By using alarm recall/scan/search functions, pictures
recorded during alarm mode can be easily checked
•Field-by-field picture playback capability
•External timer input capability
•Automatic clock adjusting is possible when several
VCRs are connected
•On-screen display permits easy-to-follow operation
•Auto head cleaning function
•Tape before-end signal output capability
•Warning signal output capability
•Buzzer setting function
•Power-failure protection for up to 30 days
•Security lock function for avoiding accidental operation errors
•External control capability via an optional RS-232C interface
•Remote control capability of basic operational functions
through ø3.5 mm mini jack
52
48 72 96 120 168 240 360 480 720 960
Rear Panel
Specifications
SVT-5050P
General
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 5 to 40°C (41 to 104°F)
Operating humidity: Less than 80%
Dimensions: 420 (W) x 100 (H) x 349 (D) mm
(16 5
Mass: Approx. 5.5 kg (12 lb 2 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time: 3, 12, 24, 48, 72, 96, 120, 168, 240, 360, 480,
720 and 960 hours (with an E-180 tape)
(One shot mode is also available)
Alarm recording speed: 3, 12-hour mode, NC*
Alarm recording duration: 20 s, 40 s, 1 m, 2 m, 3 m, 4 m, 5 m, CC*
Fast forward/rewind time: Approx. 4 minutes (with an E-180 tape)
Video
Recording Playback system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass
transformation direct recording
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Input:
1.0 Vp-p, 75 Ω, unbalanced (BNC type)
Output:
Horizontal resolution: Colour mode: More than 240 TV lines
Black & White mode: More than 350 TV lines
Signal-to-noise ratio: 43 dB
Audio
Audio recording mode: 3, 12 and 24-hour mode
Input: -7.8 dBu, 47 kΩ (phono jack)
-7.8 dBu, 600 Ω (phono jack)
Output:
-60 dBu, 600 Ω (ø3.5mm mini jack)
Microphone input:
Others
Alarm input: Low level
Alarm output: +5 V, 5.7 kΩ (Low active)
Switch output: +5 V, 5.7 kΩ (Low active)
Tape end output: +5 V, 5.7 kΩ (Low active)
Warning output: +5 V, 5.7 kΩ (Low active)
Timer output: +12 V, 5.7 kΩ (high active)
External timer input: Low level
Clock set output: +5 V, 5.7 kΩ (Low active)
Clock set input: Low level
Series output: +5V, 5.7 kΩ (Low active)
Low level
Series input:
One-shot input: Low level
Alarm reset: Low level
Control terminals: ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)
Notes * 1 No change of recording speed
* 2 Stays an alarm for as long as the alarm input remains active.
0 dBu=0.775 Vrms
Supplied Accessories
AC power cord (1)
Operation manual (1)
Optional Accessory
SVT-RM10 Remote Control Unit
RS-232C interface board SVT-RS1A
TLV parts kit TPK-887P
/ x 4 x 13 3 / inches)
8 4
1
2