Mahlkonig DK15 Service Manual page 3

I N D U S T R I E M Ü H L E N | I N D U S T R I A L G R I N D E R
16. Take off the adjustment cover (11) by loosening the middle
knurled screw.
17. Start the grinder and slowly turn the grind adjustment to-
wards fi ne until you hear the discs touching (ringing noise).
Adjust the grinder to the fi nest setting.
This discs may not touch at the fi nest setting,
since their lifetime will decrease dramatically.
18. Refi t the adjustment cover (11) showing the fi nest setting, in
order to block the discs from touching.
11
9
10
12
13