Touchpad - HP Chromebook 15 Series Maintenance And Service Manual

Touchpad

NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is included in
the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Table 5-7 Touchpad and cable descriptions and part numbers
Description
Touchpad for use in cloud blue models
Touchpad for use in mineral silver models
Touchpad cable
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad:
1. Disconnect the cable from the ZIF connector on the system board (1).
2. Remove the four Phillips M2.0 × 3.0 screws (2) that secure the touchpad bracket to the computer.
3. Remove the touchpad bracket from the computer (3).
4. Remove the three Phillips M2.0 × 3.0 broadhead screws (4) that secure the touchpad to the computer.
5. Remove the touchpad from the computer (5).
Reverse this procedure to install the touchpad.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 25).
22).
23).
Component replacement procedures
Spare part number
L54818-001
L56081-001
L54817-001
33