Fan
Table 5-5
Fan description and part number
Description
Fan
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the fan:
1.
Detach the USB board cable from the fan (1). The cable is secured to the fan with adhesive.
2.
Disconnect the fan cable from the system board (2).
3.
Remove the two Phillips M2.0 × 4.0 screws (3) that secure the fan to the computer.
4.
Remove the fan (4).
Reverse this procedure to install the fan.
30
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
23).
Spare part number
L54807-001
22).
Battery on page
25).