1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. SAT-A55 RM-Y802
  6. Operating instructions manual

Sony SAT-A55 Operating Instructions (primary manual) Operating Instructions Manual

Directv digital satellite receiver
Hide thumbs Also See for SAT-A55 Operating Instructions (primary manual):
Table of Contents

Advertisement

Quick Links

See also: Service Manual
DIRECTV Digital
Satellite Receiver

Operating Instructions

Before you begin using your Digital Satellite Receiver for
the first time, follow the instructions in "Connecting Your
Digital Satellite Receiver" on pages 6-13 and "Setting Up
Your Digital Satellite Receiver (SYSTEM)" on pages 22-34.
Also, make sure your Satellite Dish Antenna has been
properly installed and call your service provider to begin
service:
DIRECTV: 1-800-DIRECTV (347-3288)
SAT-A55 MODEL ONLY
RF ANTENNA: This Digital Satellite Receiver is shipped
with IR reception enabled and RF reception disabled. To
use the RF feature (and the RF Antenna) you must change
the factory setting (IR only) to the RF setting (RF only)
using the on-screen displays, as described in these
Operating Instructions.
SAT-A55
SAT-B55
© 1999 by Sony Electronics Inc.
permission is prohibited. All rights reserved.
Reproduction in whole or in part without written
4-075-080-21 (1)

Advertisement

Table of Contents
loading

Related Manuals for Sony SAT-A55 Operating Instructions (primary manual)

Summary of Contents for Sony SAT-A55 Operating Instructions (primary manual)

  • Page 1: Operating Instructions

    (IR only) to the RF setting (RF only) using the on-screen displays, as described in these Operating Instructions. SAT-A55 SAT-B55 © 1999 by Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited. All rights reserved. 4-075-080-21 (1)
  • Page 2 For general information, or to resolve problems related to the operation of your Digital Satellite Receiver or Satellite Dish Antenna, please contact your Sony dealer. If your dealer or installer is unable to answer your questions, call the Sony Satellite System Information Center at 1-800-838-7669. Trademark and Copyrights Sony, Media Window, Signal Seeker, Remote Commander and SmartFile are trademarks of Sony.
  • Page 3 Getting to Know Your Digital Satellite Receiver Connecting Your Digital Satellite Receiver (Page 6) Setting Up Your Digital Satellite Receiver (Page 22) Using the Favorite Stations Guide (Page 40) Using Your Remote Control (Page 14) SATELLITE RECEIVER Using the Program Guide (Page 37) Setting Locks &...
  • Page 4 Features Congratulations on your purchase of the Sony Digital Satellite Receiver. This manual can help you to become familiar with the many great features of the Digital Satellite Receiver. Check below to find out about some of the most exciting features.

  • Page 5: Table Of Contents

    Step 3: Connecting Your TV ... 9 Step 4: Adding a VCR and Audio System ... 10 Step 5: Connecting the VCR Controller ... 11 Connecting a Sony SmartFile™ VCR ... 11 Step 6: Connecting the RF Antenna (SAT-A55 only) ... 12 Step 7: Connecting the AC Power Cord ...

  • Page 6: Connecting Your Digital Satellite Receiver

    Connecting Your Digital Satellite Receiver Carton Contents Check to make sure the following items are in the Digital Satellite Receiver’s carton. If you are missing any items, contact your Sony dealer. Digital Satellite Receiver Remote Control* AC Power Cord Size AA Batteries...

  • Page 7: Connection Overview

    Connection Overview Follow the procedures or make the connections in each of the steps to connect your Digital Satellite Receiver. Step 1: Inserting the Batteries Step 2: Connecting the Satellite Step 2: Connecting the Satellite Dish Antenna and Dish Antenna and Telephone Line Telephone Line Step 3: Connecting Your TV...

  • Page 8: Step 2: Connecting The Satellite Dish Antenna And Telephone Line

    Step 2: Connecting the Satellite Dish Antenna and Telephone Line Digital Satellite Receiver Connect the SATELLITE IN jack to your Satellite Dish Antenna using RG-6 coaxial cable. RG-6 Coaxial Cable from Satellite Dish Antenna Notes • The SAT-A55 model is shown. Connections for the SAT-B55 model are the same.

  • Page 9: Step 3: Connecting Your Tv

    Step 3: Connecting Your TV Digital Satellite Receiver If your TV has A/V input A/V Cable jacks Connect the VIDEO OUT jacks on your Digital Satellite Receiver to the A/V input jacks on your TV using the supplied A/V cable. (Be sure to match the colors on the jacks with the colored plugs on the A/V cable.)

  • Page 10: Step 4: Adding A Vcr And Audio System

    Connect the DIGITAL OUT (OPTICAL) of the Digital Satellite Optical Cable Receiver to the (SAT-A55 only) optical digital (optional Sony input of your audio accessory POC-15A) system. If you connect your Digital Satellite Receiver to a Dolby Digital receiver, set...

  • Page 11: Step 5: Connecting The Vcr Controller

    If the infrared sensor is not marked on your VCR, shine a flashlight into the front panel of the VCR to locate the sensor. If you are using a Sony SmartFile VCR to take advantage of the Program Data Download feature Use this connection instead of the VCR Controller connection.

  • Page 12: Step 6: Connecting The Rf Antenna (Sat-A55 Only)

    Step 6: Connecting the RF Antenna (SAT-A55 only) If you want to use the RF feature Connect the RF Antenna to the RF REMOTE jack of the Digital Satellite Receiver. Then, place the RF Antenna in a convenient location. Digital Satellite Receiver Notes •...

  • Page 13: Step 7: Connecting The Ac Power Cord

    Step 7: Connecting the AC Power Cord After all other connections are complete, connect the AC Power Cord to the Digital Satellite Receiver. Digital Satellite Receiver Step 8: Inserting the Access Card After you insert the Access Card and your Satellite Dish Antenna is installed, you are ready to begin enjoying digital satellite programming.

  • Page 14: Viewing Pictures From Your Digital Satellite Receiver

    Viewing Pictures From Your Digital Satellite Receiver Using Your Remote Control RM-Y802 Remote Control (SAT-A55 model) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER...
  • Page 15 qa POWER buttons Turn on and off the Digital Satellite Receiver, TV and VTR (VCR). To operate your TV or VTR (VCR), you must first set up the remote control (see page 65). qs FUNCTION buttons Select the equipment (CABLE, TV or SAT) that you want to operate.

  • Page 16: Rm-Y139 Remote Control (Sat-B55 Model)

    Using Your Remote Control (continued) RM-Y139 Remote Control (SAT-B55 model) MUTING POWER FUNCTION TV/VIDEO TV/VTR TV/SAT DISPLAY ENTER INDEX CATEGORY GUIDE JUMP EXIT MENU FAVORITE PAGE CODE SET RM-Y139 SATELLITE RECEIVER Note You may need to set up the remote control to operate your other audio/video equipment.
  • Page 17 9 VOL buttons Adjust the volume. To operate your TV, you must first set up the remote control (see page 65). q; CODE SET button Lets you program the remote control to operate your TV and other audio/video equipment (see page 65).

  • Page 18: Selecting Items

    Selecting Items Note (SAT-B55 model) Whenever these Operating Instructions refer to using the joystick, use the arrow V/v/B/b buttons surrounding the button. Be sure to press the SAT FUNCTION button before operating the Digital Satellite Receiver with the remote control. In on-screen displays such as the Main Menu and program guides, you must first move the highlight to the item you want, then select the item.

  • Page 19: Turning On The Power

    Turning On the Power POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP CATEGORY GUIDE FAVORITE INDEX MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control The FUNCTION button indicators light up to show you which equipment the remote control is operating.

  • Page 20: Changing Channels

    Changing Channels POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control You can see information about a program you are watching by pressing the DISPLAY button.

  • Page 21: Using The On-Screen Displays

    Using the On-Screen Displays Using the Main Menu The Main Menu acts as a gateway to all of the features your Digital Satellite Receiver has to offer. ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE...

  • Page 22: Setting Up Your Digital Satellite Receiver (System)

    Setting Up Your Digital Satellite Receiver (SYSTEM) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Return Closes the SYSTEM pop-up to show the Main Menu. Antenna Lets you find the position of the satellite and helps you get the strongest signal from your Satellite Dish Antenna...

  • Page 23: Setting Up The Satellite Dish Antenna

    ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Antenna Type Select Round, Oval 2-Sat or Oval 3-Sat depending on your Satellite Dish Antenna type. Transponder Lets you select the transponder from which the Satellite Dish Antenna receives its signal.
  • Page 24 Setting Up Your Digital Satellite Receiver (SYSTEM) (continued) Selecting “off” in the Signal Seeker pop-up may allow you to see the Signal Strength Meter if you use a diplexer or certain other accessories with your Satellite Dish Antenna. Note The Signal Seeker feature is available only with the Round Antenna.
  • Page 25 If it is more convenient for you to enter latitude and longitude, select “Latitude & Longitude” instead of “Zip Code”. Note Round Satellite Dish Antennas do not have a Tilt setting. Entering Your Antenna Location The Antena Location pop-up helps you or your professional installer aim your Satellite Dish Antenna based on your zip code or your latitude and longitude location.

  • Page 26: Setting Up The Vcr Control Feature

    The VCR Control feature lets the Digital Satellite Receiver control your VCR using the Timer & Rec feature (see page 60). To use the VCR Control feature you must connect the VCR Controller or a Sony SmartFile VCR (see page 11).
  • Page 27 Setting the VCR Manufacturer Code The VCR Manufacturer Code allows the Digital Satellite Receiver to control your VCR using the VCR Controller or a Sony SmartFile VCR. Highlight and select “Manufacturer” from the VCR Control display (see page 26).
  • Page 28 Setting Up Your Digital Satellite Receiver (SYSTEM) (continued) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Program name Program length Note...

  • Page 29: Performing A System Test

    Remote Control Highlight and select “Test”. The system test begins. If the system test fails, check your connections before calling your service provider or Sony. Select “Return”. The System Test display closes to show the Main Menu. Return Closes the System Test display to show the Main Menu.

  • Page 30: Setting The Aspect Ratio

    Setting Up Your Digital Satellite Receiver (SYSTEM) (continued) POWER MUTING CABLE FUNCTION AUDIO VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Note To use the Wide aspect ratio feature, you must receive a 16:9 aspect ratio signal.

  • Page 31: Replacing Your Access Card

    Replacing Your Access Card Occasionally your service provider may send you a new Access Card. POWER MUTING Use this display to set up your new card. See “Inserting the Access Card” CABLE on page 13 for information about inserting the Access Card into the AUDIO FUNCTION Digital Satellite Receiver.

  • Page 32: Selecting Rf Or Ir Remote Control Reception (Sat-A55 Only)

    Setting Up Your Digital Satellite Receiver (SYSTEM) (continued) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Remote Signal Lets you select IR or RF as the type of signal the receiver accepts.
  • Page 33 Highlight and select “RF”. The Remote Signal pop-up closes to show the Remote Control display. Highlight and select “Return”. The display closes to show the Main Menu, and the Digital Satellite Receiver is set to receive RF signals from the remote control. Setting the Security Code If the Digital Satellite Receiver is receiving signals from another RF remote control in your home (or from your neighbor’s home), you can...
  • Page 34 Setting Up Your Digital Satellite Receiver (SYSTEM) (continued) Note If the remote control no longer operates your Digital Satellite Receiver after completing this procedure, use the controls on the front panel to open the Remote Control display (see page 32). Then repeat the steps in “Setting the Security Code”...

  • Page 35: Using The Guides Menu

    Viewing Station and Program Information (GUIDES) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Return Closes the GUIDES Menu to show the Main Menu. Alpha List Shows a list of categories (movies, sports, etc.) and only the programs that match the category you select in...

  • Page 36: Using The Alpha List

    Viewing Station and Program Information (GUIDES) (continued) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Using the Alpha List The Alpha List shows program information in the category you select (such as movies, sports, etc.) in alphabetical order.

  • Page 37: Using The Program Guide

    ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Media Window Move the joystick up and down to highlight different stations. Press the CH V/v buttons to move the highlight to the next page of stations.

  • Page 38: Using The Category Guide

    Viewing Station and Program Information (GUIDES) (continued) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Press the EXIT button to close the Category Guide and return to the previous station.

  • Page 39: Using The Station Index

    POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Tips • Press the EXIT button to close the Station Index and return to the previous station.

  • Page 40: Using The Favorite Stations Guide

    Viewing Station and Program Information (GUIDES) (continued) POWER MUTING CABLE FUNCTION AUDIO VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Press the EXIT button to close the Favorite Stations guide and return to the previous station.
  • Page 41 POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Press the EXIT button to close the Favorite Stations guide and return to the previous station.
  • Page 42 Viewing Station and Program Information (GUIDES) (continued) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Press the EXIT button to close the Favorite Stations guide and return to the previous program.

  • Page 43: Using Other Guides

    POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP CODE SET RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Press the EXIT button to close the Other Guides display and return to the previous station.
  • Page 44 Viewing Station and Program Information (GUIDES) (continued) Select the category you want. If the category you select has subcategories, the available subcategories appear. Select the subcategory you want. The programs that match your selections appear in the lower half of the display. Highlight and select the program you want.

  • Page 45: Viewing Pay Per View Programs

    Note To order pay per view by remote, a DIRECTV subscription is required and the Digital Satellite Receiver must be continuously connected to a land-based phone line. Viewing Pay Per View Programs Many programs are available as pay per view. By selecting a pay per view program you agree to be charged for that program.

  • Page 46: Adjusting The Displays (Preferences)

    Adjusting the Displays (PREFERENCES) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Return Closes the PREFERENCES Menu to show the Main Menu. Display Options Lets you change the color scheme of the on-screen displays, choose how the stations are ordered in the guides and select what is displayed in the...

  • Page 47: Setting Display Options

    ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Colors Lets you change the color of the on- screen displays (see page 48). Station order Lets you select the order in which stations appear in the list area (see page 49).
  • Page 48 Adjusting the Displays (PREFERENCES) (continued) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP GUIDE FAVORITE INDEX CATEGORY MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Changing the Color Scheme Highlight and select “Colors”...
  • Page 49 Changing the Station Order You can select numerical or alphabetical for the order in which stations POWER MUTING appear in the List Area of the Program Guide, Category Guide and Other CABLE Guides display. AUDIO FUNCTION VOLUME CABLE Highlight and select “Station Order” from the Display SLEEP TV/SAT TV/VIDEO Options display (see page 47).

  • Page 50: Setting Up Custom Stations

    Adjusting the Displays (PREFERENCES) (continued) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Setting Up Custom Stations The Custom Stations display lets you choose which stations will be skipped in the Program Guide, Category Guide and Station Index, and when you change channels using the CH +/–...

  • Page 51: Selecting Data Services

    Highlight and select a station icon to add or remove the “X” mark. The “x” mark indicates that the station will be skipped when you open the Program Guide, Category Guide or Station Index, or change channels using the CH +/– buttons. Highlight and select “Return”.

  • Page 52: Viewing Messages (Messages)

    Viewing Messages (MESSAGES) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Delete Closes the message pop-up and deletes the message. Return Closes the message pop-up and saves the message. Note Your receiver can hold a total of between 10 and 20 new and old messages,...

  • Page 53: Setting Locks And Limits (Locks & Limits)

    Setting Locks and Limits (LOCKS & LIMITS) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Receiver Status Shows if your Digital Satellite Receiver is now locked or unlocked. Spending Limit Sets a maximum limit on charges per event (see page 54).
  • Page 54 Setting Locks and Limits (LOCKS & LIMITS) (continued) POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Changing the Spending Limit The spending limit pop-up lets you limit the amount you can spend per event on pay per view purchases.
  • Page 55 Changing the Rating Limit The Rating Limit pop-up lets you limit programs according to the content rating. POWER MUTING CABLE Highlight and select “Rating Limit” from the Locks & FUNCTION Limits edit display (see page 53). AUDIO VOLUME CABLE The Rating Limit pop-up appears. SLEEP TV/SAT TV/VIDEO DISPLAY...
  • Page 56 Setting Locks and Limits (LOCKS & LIMITS) (continued) POWER MUTING CABLE FUNCTION AUDIO VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Changing the Stations Blocked Settings The Stations Blocked feature lets you block access to specific stations.

  • Page 57: Locking Your Receiver

    POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP CATEGORY GUIDE FAVORITE INDEX MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Do not forget your passcode. You will need this number to unlock your system or make any changes to the locks or limits you have set.

  • Page 58: Unlocking Your Receiver

    Setting Locks and Limits (LOCKS & LIMITS) (continued) POWER MUTING CABLE AUDIO FUNCTION CABLE VOLUME SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control You can temporarily unlock your Digital Satellite Receiver with your passcode if you select a program from a guide and the...

  • Page 59: Checking Pay Per View Purchases (Purchases)

    Checking Pay Per View Purchases (PURCHASES) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control You can purchase pay per view programs from any guide. See “Viewing Pay Per View Programs”...

  • Page 60: Scheduling Programs (Timer & Rec)

    • Your Digital Satellite Receiver has a Program Data Download feature and will automatically send the following information when you record a program with a Sony SmartFile VCR: program title, program category, program date/time and duration. For further information regarding the SmartFile function, refer to your Sony SmartFile VCR Operating Instructions.

  • Page 61: Using The Timer & Rec Feature

    ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP RM-Y802 CODE SET SATELLITE RECEIVER RM-Y802 Remote Control Date and day Channel number and station name Program title When using the VCR Control feature to record a future program, make sure that your VCR is turned off before the program begins.
  • Page 62 Scheduling Programs (TIMER & REC) (continued) 1 Press V/v to select from 2 Press the following. to move to the next • Any date up to 30 days from the current date item. • EVERY SUN • EVERY MON • EVERY TUE •...

  • Page 63: Editing Timer Events

    Editing Timer Events ALT AUDIO JUMP You can easily edit or delete timer events. FAVORITE INDEX CATEGORY GUIDE Press the MENU button, then highlight and select TIMER & REC. MENU The Timer & Rec display appears. EXIT VTR3 2 DVD AMP RM-Y802 CODE SET MENU...

  • Page 64: Setting Audio Options (Audio)

    Setting Audio Options (AUDIO) ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT VTR3 2 DVD AMP CODE SET RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Current Audio Opens a pop-up that displays the languages available for the current program. Default Audio Opens a pop-up that displays the eight available default languages.

  • Page 65: Other Information

    Other Information Setting Up the Remote Control POWER MUTING CABLE AUDIO FUNCTION VOLUME CABLE SLEEP TV/SAT TV/VIDEO DISPLAY ENTER ALT AUDIO JUMP FAVORITE INDEX CATEGORY GUIDE MENU EXIT CODE SET VTR3 2 DVD AMP RM-Y802 SATELLITE RECEIVER RM-Y802 Remote Control Tips •...

  • Page 66: Manufacturer Codes

    Manufacturer Codes TV Codes Manufacturer Code Sony Admiral (M. Wards) 102, 114, 109 Bell & Howell 114, 109, 138 (M. Wards) Broksonic 103, 112 Craig 122, 123, 120, 121 Croslex Curtis Mathis 103, 119, 123 Daewoo 135, 136, 103 Daytron...

  • Page 67: Cable Box Codes

    338, 342 Toshiba 312, 311 Wards 327, 328, 335, 331, 332 Yamaha 330, 314, 336, 337 Zenith DVD Codes (RM-Y802 Only) Manufacturer Code Sony Panasonic Pioneer Toshiba AMP (Amplifier) Codes (RM-Y802 Only) Manufacturer Code Sony Denon (Sharp) 516, 517, 518...

  • Page 68: Location And Function Of Controls

    Location and Function of Controls Front Panel POWER 1 POWER Button Turns your Digital Satellite Receiver on and off. 2 POWER Indicator Indicates whether the Digital Satellite Receiver is on or off. 3 TIMER Indicator Indicates that the Timer is set. 4 MESSAGE Indicator Indicates that you have a new message.

  • Page 69: Sat-A55 Back Panel

    VCR CONTROL jack Allows the VCR Controller to control a VCR and/ or cable box. Also allows connection of a monaural cable for use with Sony SmartFile VCRs. qs DIGITAL OUT (OPTICAL) Outputs digital audio signals to the digital optical...

  • Page 70: Sat-B55 Back Panel

    Can be used for future products such as Personal Video Recorders. q; VCR CONTROL jack Allows the VCR Controller to control a VCR and/ or cable box. Also allows connection of a monaural cable for use with Sony SmartFile VCRs.

  • Page 71: Specifications

    Audio/Video Cable (1) Coaxial RF Cable (1) Telephone Line Cord (1) AC Power Cord (1) VCR Controller (1) S-Video Cable (1) (SAT-A55) RF Antenna (1) (SAT-A55) Optional Sony-brand Digital Satellite Receiver Accessories Local TV Antenna ANJ-AA1 Installation Kit ANJ-DS2 Amplifier...

  • Page 72: Troubleshooting

    • If the cable distance between the Satellite Dish Antenna and the Digital Satellite Receiver is more than 100 feet, you must use the Sony Amplifier EAC-DA1. • Make sure your Access Card is inserted correctly (see page 13). • Move any antenna cables that may be directly above your Digital Satellite Receiver.
  • Page 73 Problem You cannot order a pay per view program You cannot find the station of the pay per view program that you ordered You cannot cancel a pay per view order The program highlighted in the Program Guide does not appear You cannot see any Favorite Stations Locks &...
  • Page 74 Troubleshooting (continued) Problem You cannot record programs with your VCR Access Card problems Remote control does not work Audio noise “Frozen” picture or display If you are unable to resolve problems with your system, see “Customer Support” inside the front cover. What you can do •...

  • Page 76: Fcc Regulations And Information

    Model No.: SAT-A55/SAT-B55 Responsible Party: Sony Electronics Inc. Address: 1 Sony Drive, Park Ridge, NJ. 07656 USA Telephone No.: 201-930-6970 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may...

  • Page 77: Limited Warranty

    In addition, if you enter into a service contract with the SONY Partnership within 90 days of the date of sale, the limitation on how long an implied warranty lasts does not apply to you.

  • Page 78: Index

    Index AC Power Cord, connecting, 13 Access Card, inserting, 13 replacing, 31 slot, 13, 69, 70 Adjusting the on-screen displays, 47 Alert. See Timer & Rec. Alpha List, 36 ALT AUDIO button, 14 Antenna. See RF antenna, satellite dish antenna, and Local TV off-air antenna.
  • Page 79 Locks and limits, 53 display, 53 locking, 57 setting, 54 unlocking, 58 LOW SPEED DATA port, 69, 70 Macrovision copy-protection, 2 Mail. See messages. Main Menu, 21 Manufacturer codes, 66, 67 Media Window, 37 MENU button, 15, 17, 21, 68 Messages, 52 indicator, 68 viewing, 52...
  • Page 80 Printed in USA...

This manual is also suitable for:

Sat-b55

Table of Contents