Selecting Data Services - Sony SAT-A1 Operating Instructions (primary manual) Operating Instructions Manual

Selecting Data Services

How to Determine if Data
Services Are Available on a
Station
Selecting a
Data Service
DATA SERVICES appears only when
the station you're tuned to includes
data services.
Selecting CANCEL returns you to the
previous screen, without saving your
selections.
The screen will be titled "Wide Band" or
"Low Speed," depending on which type of
data service is available for that station.
The titles of the data services may be different,
based on the service being provided.
In the future, your program providers may make available data
services, which you can access through specific stations using the DSS
receiver's wide band and low-speed data ports. For details about using
the data ports to access these data services, call your program
providers.
To determine if data services are available on a specific station:
1
Tune to the station.
2
Press the DISPLAY button to bring up the Program Banner.
If the Program Banner includes the data services symbol ( ), this
indicates that data services are available for that specific station.
To select a data service:
1
Select DATA SERVICES from the Custom Setup Menu.
CUSTOM SETUP MENU
SET FAVORITE
STATIONS
SET DEFAULT
LANGUAGE 4 EXIT
DATA SET CUSTOM
SERVICES 7 STATIONS
2
The Data Services screen appears, which lists only the data services
that are available for the station you are currently tuned to.
WIDE BAND DATA SERVICES
DATA 1 DATA 2
DATA 5 DATA 6
Chapter 5: Using the Custom Setup Menu
2
SET LOCKS
5 AND LIMITS 6
SYSTEM MENU
8 9
DATA 3 DATA 4
DATA 7 DATA 8
OK
CANCEL
DEFAULT
BAUD
HELP
61