Using The On-Screen Displays: Highlight And Select - Sony SAT-A1 Operating Instructions (primary manual) Operating Instructions Manual

Using the On-Screen Displays: Highlight and Select

Tip
In many of the on-screen displays you
can move the joystick in eight
directions: left, right, up, down, and
diagonally (up left, up right, down
left, and down right).
All of the features and functions of the DSS receiver can be operated
using a simple, two-step process: Highlight and Select. These two steps
are explained below.
Step 1: Highlight
Y
To highlight, move the joystick on the remote to move the on-
screen highlight
Step 2: Select
Y
After you've highlighted the item that you want, select it by
pressing the joystick.
Example: Highlight and Select
1
In the sample menu that follows, moving the joystick up moves the
highlight from ITEM 5...
SAMPLE MENU
ITEM 1 ITEM 2
ITEM 4 ITEM 5
ITEM 7 ITEM 8
... to ITEM 2.
SAMPLE MENU
ITEM 1 ITEM 2
ITEM 4 ITEM 5
ITEM 7 ITEM 8
2
Pressing the joystick selects ITEM 2.
You can apply this basic operation of highlighting and selecting to
perform any of the system's functions.
to the item that you want to select.
ITEM 3
ITEM 6
ITEM 9
ITEM 3
ITEM 6
ITEM 9
Chapter 4: Using the System Features
27