Using Display And Jump - Sony SAT-A1 Operating Instructions (primary manual) Operating Instructions Manual

Using DISPLAY and JUMP

Displaying the
Program Banner
Jumping Back and Forth
Between Stations
40
Chapter 4: Using the System Features
The program banner provides useful information about the program
you're currently watching.
Note
Before you can bring up the Program Banner, you must first clear the program
guide from your TV screen. Pressing EXIT turns off the on-screen displays.
Also, you may need to change to another station if a message appears, which
requests that you press the joystick to purchase the program, etc.
To display the Program Banner:
Y
Press the DISPLAY button.
The Natural
9:30-11:30 PM
MON JUNE 22 9:35 PM RATED PG-13
The Program Banner shows the program title, station name and
number, start and end times, current date and time, and rating. It may
also indicate that data services ( ) and alternate audio tracks ( ) are
available, that new mail has been received (
system is locked ( ).
To turn off the Program Banner, press the DISPLAY button again.
For information about selecting data services, see page 61; alternate
audio tracks, see page 41; mail messages, see page 47; system lock, see
page 54.
You can use the JUMP button to switch or "jump" back and forth
between two stations.
To display the last station you selected:
Y
Press the JUMP button.
Note
You cannot jump to stations you tuned to using the CH+/CH- buttons.
HBO 980
), and whether or not the