6. Controller
6-1. PAR-W31MAA specifications
6. Controller
Item
Runs and stops the operation of a group of units
ON/OFF
Switches between Mode 1/Mode 2/Mode 3
Operation mode switching
* Available operation modes vary depending on the unit to be connected.
* Switching limit setting can be made via a remote controller.
Temperature can be set within the ranges below. (in increments of 0.5°C or 0.5°F)
40°C ~ 90°C
Water temperature setting
* The settable range varies depending on the unit to be connected.
10°C ~ 90°C
Water temperature display
(in increments of 0.5°C or 0.5°F)
* The settable range varies depending on the unit to be connected.
Individually prohibits operations of each local remote control function: ON/OFF,
Permit/Prohibit
Operation modes, water temperature setting, Circulating water replacement warning
reset.
* Upper level controller may not be connected depending on the unit to be connected.
ON/OFF/Water temperature setting can be done up to 8 times one day in the week.
Weekly scheduler
(in increments of a minute)
When an error is currently occurring on a unit, the afflicted unit and the error code are
Error
displayed.
Self check (Error history)
Searches the latest error history by selecting "CHECK" from the Main menu.
The language on the dot matrix LCD can be changed. (11 languages)
LANGUAGE setting
English/French/German/Swedish/Spanish/Italian/Danish/Dutch/Finnish
/Norwegian/Portuguese
(Front view)
120
MEES19K001
Description
(Side view)
19
Operations
(Rear view)
46
Display
Unit: mm
44