Meters For Operating Hours - LG ThermaV Owner's Manual

Advanced settings
3 The chosen parameter is displayed within * *.
Choose the parameter Yes by pressing
and confirming by pressing the
key. You have thus turned on the operation of
the mode Screed drying.
4 Other parameters of the programme for Screed
drying can be changed with the same procedure.
For returning to the basic view press the key
(MENU) twice.

Meters for operating hours

To view the operating hours for individual components go to the main menu and press the key
under consecutive no.1 in the table below. If you would like to view other parameters listed in the
table below use the key
Cons.
Parameters of operating hours view
No.
Comp.HEAT.[h]:
Comp.COOL.[h]:
1
Comp.DHW [h]:
D: 0 D-1: 0
HeatSource [h]:
AdHeater 1[h]:
2
AdHeater 2[h]:
MainPump.[h]:
Passive [h]:
Alt.Sourc [h]:
3
Comp.Heata.[s/d]:
Comp.CooL. [s/d]:
Comp.DHW [s/d]:
Defrost [s/d]:
4
44 Air-to-Water Heat Pump
(ENTER)
to navigate to it.
0
0
0
0
0
0
0
0
0
0
0
0
0
Mode
*Screed drying
Initial
Maximum....................30°C
Maximum....................30°C
Step............................ 24 h
Maintaining
>Final
Parameter description
Operating hours for compressor in heating.
Operating hours for compressor in cooling.
Operating hours for compressor in heating
DHW.
D: Operating minutes of the current day.
D-1: Operating minutes of the previous day.
Operating hours of the heat source
(ventilator, submersible pump).
Operating hours of the auxiliary source 1
(flow electric heater).
Operating hours of the auxiliary source 2
(external backup source).
Operating hours of the main circulation pump.
Operating hours of passive cooling.
Operating hours of backup source.
Number of daily power-on of the compressor
in heating.
Number of daily power-on of the compressor
in cooling.
Number of daily turn-on for compressor in
heating DHW.
Number of daily power-on of the compressor
in defrost.
AUTO
YES *
20°C
264 h
20°C <