Related Manuals for Clarke COS210
Summary of Contents for Clarke COS210
- Page 1 ORBITAL SANDER MODEL NO: COS210 PART NO: 6462057 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0619 - ISS 1...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE Orbital Sander, designed for DIY use. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Power Tool Safety Warnings
POWER TOOL SAFETY WARNINGS WORK AREA 1. Keep the work area clean and well lit. Cluttered and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids or gases. Power tools create sparks which may ignite the dust or fumes. -
Page 4: Additional Safety Warnings For Sanders
5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. POWER TOOL USE AND CARE 1. Do not force the power tool. Use the correct accessories for your application. -
Page 5: Explanation Of Symbols & Pictograms
4. Take care when sanding lead based paint or when sanding wood or metal which may produce toxic dust, - do not let children or pregnant women enter the work area. VIBRATION The declared vibration emission values stated in the specification have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. -
Page 6: Electrical Connections
ELECTRICAL CONNECTIONS WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. -
Page 7: Before Use
BEFORE USE The sander is supplied with the following items: • 3 x P60 grit hook and loop sanding sheets • 3 x P120 grit hook and loop sanding sheets • 3 x P240 grit hook and loop sanding sheets •... -
Page 8: Operation
REPLACEMENT SHEETS The following sanding sheets are available from your CLARKE dealer. Grit Size (mm) Part No 93 x 287 mm... -
Page 9: Operating Technique
STARTING & STOPPING THE SANDER Ensure the sander is switched OFF before plugging into the power supply. 1. Ensure the sander is switched OFF before plugging into the power supply. 2. Switch the machine ON or OFF by sliding the switch forward and backward. -
Page 10: Maintenance
Regularly clean the ventilation slots using a soft dry brush or dry cloth. Do not use any abrasive or solvent-based cleaner. A damaged power cable should be replaced by your CLARKE dealer or qualified electrician. The bearings in this sander are sealed for life and require no maintenance. -
Page 11: Declaration Of Conformity
DECLARATION OF CONFORMITY Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...
Need help?
Do you have a question about the COS210 and is the answer not in the manual?
Questions and answers