Related Manuals for Clarke COS200
Summary of Contents for Clarke COS200
- Page 1 1/3 SHEET 1/3 SHEET ORBITAL SANDER ORBITAL SANDER MODEL No. COS200 OPERATING & MAINTENANCE INSTRUCTIONS 1107...
-
Page 2: Specifications
** See notes on page 11 Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice When disposing of this product, do not dispose of with general waste. It must be disposed of according... -
Page 3: Parts And Service
Thank you for selecting this CLARKE 1/3 Sheet Orbital Sander, which is designed for DIY use only. Before attempting to use the machine, please read this leaflet thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the Sander giving you long and satisfactory service. -
Page 4: Safety Precautions
SAFETY PRECAUTIONS WARNING: As with all machinery, there are certain hazards involved with their operation and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are overlooked or ignored, personal injury to the operator or damage to property, may result. 1. - Page 5 14. ALWAYS wear proper apparel. loose clothing or jewellery may get caught in moving parts. wear protective hair covering to contain long hair. 15. ALWAYS use recommended accessories. the use of improper accessories could be hazardous. 16. ALWAYS remove plug from electrical outlet when adjusting, changing parts, or working on the machine.
-
Page 6: Electrical Connections
ELECTRICAL CONNECTIONS This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for connection to a standard, domestic electrical supply. Should the plug need changing at any time, ensure that a plug of identical specification is used. WARNING This appliance is Doubly Insulated, and the two wires in the mains lead should be wired up in accordance with the following colour code:... -
Page 7: Operation
OPERATION With the mains cable disconnected from the mains supply, select the abrasive paper appropriate for the job in hand, and attach it to the Base Plate, by releasing the two spring clips - one for each end. Align the abrasive sheet so that the holes are perfectly aligned with those in the base plate, and bend the ends over, securing at each end with the spring clip. -
Page 8: Maintenance
This indicates worn brushes. This problem is quickly remedied but you should consult your CLARKE dealer for parts and advice. Sander does not operate when switched ON Check to ensure the fuse is sound, and replace if necessary. If the fuse is sound, or the blows repeatedly, consult your CLARKE dealer. -
Page 9: Parts Diagram
PARTS DIAGRAM PARTS LIST Item Description Part No. ON/OFF Trigger Mechanism Trigger Lock Base Plate HTCOS20003 Abrasive Paper Retaining Clip HTCOS20004 Dust Extraction Adapter HTCOS20005 * Consult your CLARKE dealer. -
Page 10: Vibration Emissions
MODEL No: COS200 DESCRIPTION: 1/3 SHEET ORBITAL SANDER Declared vibration emmission value in accordance with EN12096 Measured vibration emmission value - a: ....