Service Program Mode
5.1.4 SERVICE PROGRAM MODE TABLES
Service Table Key
Notation
[range / default /
step]
italics
*
1111
DFU
Japan only
(S)
(L)
D017/D018/D019/D020
Example: [-9 to +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, the setting is reset to +3.0 after an
NVRAM reset, and the value can be changed in 0.1 mm steps
with each key press.
Comments added for reference.
Value stored in NVRAM. After a RAM reset, this default value
(factory setting) is restored.
An SP number set in bold denotes a "Special Service Program"
mode setting that appears only after entering the SP mode by
pressing
and Copy SP together. (See 'Service Program Mode
Operation'.)
"Design or Factory Use". Do not change this value.
The feature or item is for Japan only. Do not change this value.
Sideways feed direction
Lengthwise feed direction
5-12
What it means
SM