Changing The Light Bulb; Turbobrush Maintenance - Bissell Healthy Home Vacuum 16N5 series User Manual

M
aintenance and care

Changing the light bulb

1. Turn power switch off.
2. Unplug cleaner from electrical outlet.
3. Recline handle for easier access to light bulb
and remove 2 screws to lift off lens.
4. Remove the bulb by grasping bulb and pull-
ing straight out of the socket. Install the new
bulb by pushing gently into the socket until
the bulb snaps into place.

TurboBrush maintenance

The Turbobrush should be checked regularly for
clogs or debris wrapping around the brush.
1. Remove tool from hose or front of vacuum.
2. Twist collar so opening is at the top and lift
top cover to remove.
3. Remove the brush from the belt and clean
debris.
4. Replace the brush inside the belt and place
ends into slots on sides as shown.
5. Reposition top cover making sure to line up
inside tab at the front with the opening on
the cover. Twist collar until opening is at the
bottom to lock into place.
w w w . b i s s e l l . c a
2
3
2
4
5
1 - 8 0 0 - 2 6 3 - 2 5 3 5
Inside Tab
15