Set Request; Get Request; Error Response - Sony VPL-VW100 Protocol Manual

3-4-1-4. SET Request

The SET request is used to set a new value in the specified item. Details of the request and the response
are described below.
Request
Request Item No.
SET (00h) Item No.
Response
OK (01h) Item No.

3-4-1-5. GET Request

The GET request is used to acquire the value of the specified item. Details of the request and the response
are described below.
Request
Item No.
Request
GET (01h) Item No.
Response
OK (01h) Item No.

3-4-1-6. ERROR Response

When an error occurs in the contents of a request or in the result of execution, NG is returned as the
response.
NG (00h) Item No.
VPL-VW100
Data
Data
Length
n
0
Data
Length
0
n
2 Error Code (16)
Set Data (n byte)
Get Data (n byte)
11