Projecting - Sony VPL-PX41 Operating Instructions Manual

Projecting

COMMAND
OFF ON
PIC
PJ NETWORK MUTING
AUDIO
LENS
VOLUME
APA
MENU/
TAB
FREEZE
1
Plug the AC power cord into a wall outlet, then connect all equipment.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2
Press the I /
The ON/STANDBY indicator lights in green.
3
Turn on the equipment connected to the projector.
4
Press the INPUT key to select the input source.
To input from
Computer connected to the INPUT A connector
Computer connected to the INPUT B connector
Computer connected to the INPUT C (digital) connector INPUT C
Computer connected to the INPUT D connector
Video equipment connected to the VIDEO input
connector
Rear remote control
detector
2
4
INPUT
TILT/KEYSTONE
6
AIR SHOT
COVER
6
1 key.
MENU APA
I /
ENTER RESET
VOLUME
INPUT
LAMP/ TEMP/ POWER ON/
FAN SAVING STANDBY
ON/STANDBY
indicators
Press INPUT to display
INPUT A
INPUT B
INPUT D
VIDEO
23
Projecting