Sony VPL-PX41 Operating Instructions Manual page 24

To input from
Video equipment connected to the S VIDEO input
connector
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected
equipment so that it is projected clearly.
Notes
• If "Auto Input Search" is set to "On", the projector searches for the signals from
the connected equipment and displays the input channel where the input signals
are found.
For details, see "Auto Input Search" in the SET SETTING menu on page 34.
• The smart APA is effective for the input signal from a computer only.
5
Switch the equipment to be connected to output to the projector.
Depending on the type of your computer, for example a notebook, or an all-in-
one LCD type, you may have to switch the computer to output to the projector
by pressing certain keys (e.g.,
computer's settings.
Note
The key for switching the computer to output to the projector varies depending on
the type of a computer.
6
Adjust the vertical trapezoidal distortion of the picture with the "V
keystone."
Press the TILT/KEYSTONE key on the Remote Commander to display the V
keystone menu (vertical trapezoidal distortion correction) and adjust the
distortion using the M/m/</, keys.
7
Turn the zoom ring to adjust the size of the picture.
8
Turn the focus ring to adjust the focus.
Attention
Looking into the lens when projecting may cause injury to your eyes.
24
Projecting
/ /
,
LCD VGA
F7 Fx
or
and
Fn
Press INPUT to display
S VIDEO
, etc.), or by changing your