Akaso Brave 6 User Manual page 8

4. Quality: Fine, Normal, Economy
Default setting is Normal.
5. Sharpness: High, Normal, Medium
Default setting is Normal.
Sharpness controls the quality of details captured in your video footage or photos. When
you change this setting, the touch display immediately shows you the effect on your image.
6. Anti-Shaking: Off / On
Default setting is on.
This setting adjusts the footage to offset for motion during capture. The result is smoother
footage, especially in activities with relatively small but fast motion including cycling,
motorcycling, and handheld uses.
7. Date Stamp: Off / On
Default setting is on.
If you turn on Date Stamp, this camera adds date stamp to the photos you take.
Camera Setting
1. Voice Control: Off / On
Default setting is Off.
This option can let you control your Brave 6 with your voice using a set of specific commands.
2. Wi-Fi: Off / On
Default setting is off.
3. Auto Power Off: Off / 1 Minute/ 3 Minutes/ 5 Minutes/ 10 Minutes
Default setting is 3 minutes.
Powers off your Brave 6 after a period of inactivity to save battery life.
Note: Voice Control is not available when the camera is off. When using Voice Control,
consider selecting a higher time period (or Never) for Auto Power Off.
4. Screen Save: Off / 30 Seconds / 1 Minute / 3 Minutes
Default setting is 1 minute.
Turns off the LCD display after a period of inactivity to save battery life. To turn on the LCD
09
display again, press any button on the camera.
5. Special Effects: Natural, Black & White, Sepia
Default setting is natural.
6. Diving Mode: Off / On
Default setting is off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes.
Diving Mode is designed to be used in tropical and blue water, optimized for use between
10 and 80 feet.
7. Angle: 170° / 140° / 110° / 70°
Default setting is 170°.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. 170°angle captures the largest amount of the scene, while 70°
angle captures the least.
8. Language: English / Français / Deutsch / Español / Italiano / Português / Pyckий /
日本語 / 简体中文 / 繁體中文 / Polski / 한국어
Default setting is English.
9. Beep: Off / On
Default setting is on.
Sets the volume of your Brave 6's alerts.
10. Voice Prompt: Off / On
Default setting is on.
Turn on Voice Prompt, the camera will say 'Video Start' when you start recording video.
The camera will say 'Video Stop' when you stop recording video. The camera will say
'Photograph' when you take photo.
11. OSD: Off / On
Default setting is on.
OSD (On Screen Display) is a feature of action cameras that displays video or photo
resolution, date, time and setting data on the camera screen.
10