Operation - Parkside PEK 2.7 C2 Assembly, Operating And Safety Instructions

˜ Operation
Switching on and off
Press the button 17 for approx . 2 seconds .
The display 11 switches on .
The camera head's LED 13 lights up .
NOTE: The product will be automatically switch off if no button is
pressed for approx . 20 minutes .
Setting the LED's brightness
Shortly press the
The brightness of the camera head's LED 13 can be set to
10 different brightness levels .
The LED's 13 brightness can be increased only .
When the highest brightness level has been reached, the LED 13
goes off .
The brightness setting is indicated on the display 11 by the LED
brightness level indicator 21 .
Setting the display brightness
Shortly press the
The display 11 can be set to 10 different brightness levels .
The monitor brightness can be increased only .
When the highest brightness level has been reached, the lowest
brightness is used .
The display brightness setting is indicated on the display 11 by the
display illumination level indicator 20 .
Image rotation
Shortly press the
At some inspection locations (e .g . curved pipes) it is hard to obtain
a clear view . In such situations, change the display's 11 picture
orientation:
button 15 .
button 16 .
button 18 .
GB 15