Sony VPL-CX100 Operating Instructions Manual page 55

Input/Output
Video input VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
AUDIO: stereo minijack
500 mVrms, impedance more
than 47 kilohms
INPUT A HD D-sub15-pin (female)
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative
(75 ohms terminated)
B/B-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
HD:Horizontal sync input: TTL
level, high impedance, positive/
negative
VD:Vertical sync input: TTL
level, high impedance, positive/
negative
AUDIO: Stereo minijack rated
input 500 mVrms, input
impedance more than 47
kilohms
INPUT B Analog RGB: HD D-sub 15-pin
(female)
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level high impedance, positive/
negative
VD: Vertical sync input: TTL
level high impedance, positive/
negative
AUDIO: Stereo minijack, rated
input 500 mVrms, input
impedance more than 47
kilohms
INPUT C NETWORK (VPL-CX125/
CX155/CW125 only)
RJ-45: 10BASE-T/100BASE-
TX
OUTPUT MONITOR OUT': HD D-sub 15-
pin (female)
R, G, B: Gain Unity: 75 ohms
SYNC/HD, VD: 4 Vp-p (open),
1 Vp-p (75 ohms)
AUDIO OUT (variable out):
Stereo minijack
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms
REMOTE RS-232C: D-sub 9 pin
General
Dimensions 372 × 90 × 298 mm (14
3
× 11 /
4
(without the projection parts)
Mass Approx. 4.1 kg (9 lb 1 oz)
Power requirements
VPL-CX100/CX120/CX125/
CX150/CX155: 100 to 240 V
AC, 2.9 - 1.2 A,
50/60 Hz
VPL-CW125: 100 to 240V AC,
2.9-1.3A, 50/60 Hz
Power consumption
VPL-CX100/CX120/CX125/
CX150/CX155: Max. 285 W
in standby (standard): 7 W
in standby (low): 0.5 W
VPL-CW125: Max. 287 W
in standby (standard): 7 W
in standby (low): 0.5 W
Heat dissipation
VPL-CX100/CX120/CX125/
CX150/CX155: 973 BTU
VPL-CW125: 979 BTU
Operating temperature
0°C to 35°C (32°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
Size AA (R6) batteries (2) (VPL-
CX125/CX155/CW125)
Lithium battery CR2025 (1) (VPL-
CX100/CX120/CX150)
Lens cap (1)
HD D-sub 15 pin cable (2 m) (1)
(1-791-992-xx)
3 5
/ × 3 /
4 8
inches) (w/h/d)
Specifications
55