Sony VPL-CX100 Operating Instructions Manual page 22

There may be a slight difference between the actual value and the design value shown in the table
above.
Notes for VPL-CW125 only
• When "Aspect" on the Signal menu is set to other than "Full 2", black bands appear at the top and
bottom or right and left of the screen.
• When "Aspect" in the Signal menu is set to "4:3", the projected image size (diagonal) will be
approximately 84 % of "Full 2" size.
• When "Aspect" in the Signal menu is set to "16:9", the projected image size (diagonal) will be
approximately 99 % of "Full 2" size.
For details on installation, see "Installation Diagram" on page 59.
22
Installing the Projector