Adapting Run - Silvercrest Classic Model L Operating Instructions And Safety Advices

91033_silv_Heizkoerperthermostat_Content_RO.indd 21
Note: If the retaining ring can not be fit-
ted, the stability is already sufficient and
the ring is not required for the installation.

Adapting run

After the batteries have been inserted, the
motor first travels back, during which „INS"
and the activity symbol
soon as „INS" without the activity symbol
is displayed, the programmable radiator
control unit can be installed. An adapting run
(„AdA") is performed after installation to
adapt to the valve.
Place the programmable radiator control
unit on the valve.
Tighten the union nut firmly.
Press the BOOST key
shown in the display.
are displayed. As
, when „INS" is
5
GB 21
09.07.13 11:08