Turning Off The Power; Selecting The Wide Screen Mode - Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual

Turning Off the Power

1
Press the / (On/standby) switch.
? 1
A message "POWER OFF?" appears on the screen.
2
Press the / (On/standby) switch again before the message disappears.
? 1
The ? / 1 (On/standby) indicator flashes in green and the fan continues to run to reduce the
internal heat. First, the
not be able to light up the
3
Confirm that the fan stops running and the
lights in red.
You can turn off the projector by holding the
instead of performing the above steps.

Selecting the Wide Screen Mode

You can enjoy various wide screen modes according to the video signal received.
WIDE MODE
button
* RCP button: VPL-AW15 only
28
/ (On/standby) indicator flashes quickly, during which you will
? 1
? / 1 (On/standby) indicator with the
? / 1
? / 1 (On/standby) switch.
? / 1 (On/standby) indicator
(On/standby) switch for about 1 second,
Press WIDE MODE.
Each time you press the button, you can
change the "Wide Mode" setting in turn.
You can also select it using the menu. (1
page 44)