Operation And Use; Charging - Silvercrest SBL 3 B2 Operation And Safety Notes

Operation and use

This chapter contains important information and operating and
using the device.
Note: The loudspeaker switches off automatically after approx.
15 minutes without signal.

Charging

The built-in battery rechargeable battery must be fully charged
before using the device.
ATTENTION
Always charge the battery in dry environments.
Connect the USB plug on the charging cable
USB adapter (not included).
Connect the micro-USB plug on the charging cable
charging socket
light up red and the battery will be charged.
NOTE
The power LED
guish once the battery is fully charged.
The charging time is approx. 3 hours at a charging current of
500 mA and provides up to 6.5 hours of music playback. The
playback time may vary by use (volume).
14 GB/IE/NI
on the device. The power LED
6
will light up red whilst charging and extin-
1
to a PC or a
8
to the
8
will
1