Dimensions - Bosch Rexroth HED 8 Series Manual

Dimensions

1 Adjustment type "KW"
2 Adjustment type "KS"
3 Adjustment type "-"
4 Adjustment type "S"
5 Adjustment type "A"
6 Adjustment type "AS"
7 Seal ring
8 Space required to remove the key
9 Space required to remove the mating connector
10 Hexagon SW27 (with adjustment type "KS")
11 Internal hexagon SW10
12 Mating connector without circuitry for "K14" connection
(separate order see page 16)
13 Mating connector with circuitry for "K14" connection
(separate order, see page 16)
14 Mating connector for "K35" connection (separate order see
page 16)
15 Mating connector suitable for "K35", angled
(separate order see page 16)
16 Mating connector for "K35" connection with cable
(separate order see page 16)
Pressure Switch | HED 8
17 Valve mounting screw (separate order) for type HED 8 OH...
2 hexagon socket head cap screws metric
ISO 4762 - M5 x 55 - 10.9-flZn-240h-L
Friction coefficient µ = 0.09 to 0.14,
total
Tightening torque M = 6
+0,5
A
Material no. R913000261
18 Maximum diameter of the counterpart connection bore
(type HED 8 OH...)
19 Maximum diameter of the counterpart connection bore
(type HED 8 OP...)
20 Valve mounting screws (separate order) for type HED 8
OA... and ...OP...
2 hexagon socket head cap screws metric
ISO 4762 - M5 x 50 - 10.9-flZn-240h-L
Friction coefficient µ = 0.09 to 0.14,
total
Tightening torque M
= 7
+0.5
A
Material no. R913000064
RE 50061, edition: 2016-09, Bosch Rexroth AG
9/16
Nm,
Nm,