Sony SRX-T420 Installation Manual page 73

Message No. Error message
FAIL_19 LENS ERROR
FAIL_21 ADJUSTMENT ERROR
FAIL_25 DEVICE ERROR
FAIL_26 DEVICE ERROR
FAIL_27 DEVICE ERROR
FAIL_28 DEVICE ERROR
FAIL_29 DEVICE ERROR
FAIL_30 BALLAST ERROR
FAIL_36 DEVICE ERROR
SRX-T420
Trouble
Focus operation is failed.
The Z-axis operation is failed.
FPGA confi guration fails.
I C communication error.
2
LVDS error
PLL error
Parity error
The power unit for lamp is interlocked.
Setting error of DVI.
Remedy
Check the lens and lens cable. Check the
SY board. Replace the SY board if it is
damaged.
Check the lamp house-supplied motor and
harness. Replace the motor if it is dam-
aged. Check the SY board. Replace the
SY board if it is damaged.
Turn off the power once, then turn on it
again.
Turn off the power once, then turn on it
again.
Turn off the power once, then turn on it
again.
Turn off the power once, then turn on it
again.
Turn off the power once, then turn on it
again.
Turn off the power once, then turn on it
again.
Check the setting and set the operation
again.
3-5