Pc Communication - Sony SRX-T420 Installation Manual

2-2-5. PC Communication

The communication between this unit and PC is set.
Fig. 2-2-5
Projector Identifying: Setting of this unit
Port No: Type the UDP port number.
Interval: Select the packet transmission interval.
Broadcast Address: Type the broadcast address.
[>>] button:
Add the address typed in Broadcast Address to the list.
[<<] button:
Delete the address typed in Broadcast Address from the list.
(Registration list): Registration list of the broadcast address.
Controlling PC Destination:
Port No.:
Time-out:
Accept connections from these hosts: Type the IP address of the host that you accept the access.
[>>] button:
[<<] button:
(Registration list):
Network Block Reboot
[REBOOT] button: Click this button to reboot the network CPU.
n
After setting PC Communication, a reboot of the network CPU is required.
SRX-T420
Setting of PC
Type the TCP port number.
Select the time of the communication time-out.
Add the typed IP address of the host to the list.
Delete the typed IP address of the host from the list.
Registration list of the IP address of the host that you accept the
access.
2-9