Advertisement
Simple remote controller unit
Each SRX-Series projector is supplied with a remote con-
troller unit that can perform various simple functions such
as turning the lamp power on/off, adjusting the
zoom/focus, and controlling the lens shift.
Easy setup on a PC using supplied software
The SRX-Series projectors come equipped with the SRX Controller
software that allows easy setup and adjustments via its intuitive GUIs
on a PC*. These projectors can be controlled through either Ethernet
or RS-232C interfaces, and multiple projectors can be controlled from
a single PC**. A comprehensive range of setup parameters including
input configurations, colorimetry controls, installation adjustments and
maintenance settings can be controlled via this software.
* System requirements for the setup software OS: Microsoft Windows
PC is not supplied.
** When using an Ethernet connection.
SRX-Series
PC
Projector
RS-232C
PC
Easy maintenance
Special consideration for maintenance issues was given in the
development of the SRX-Series projectors. The supplied setup
software is another convenient tool for maintenance. This allows oper-
ators to easily verify the lamps' operating time. Automatic email alerts
from the projector provide operators with maintenance reminders as
well as error messages.
Operational versatility
®
XP Professional.
Ethernet
SRX-Series
SRX-Series
Projector
Projector
SRX-Series
Projector
Large Venue Projection
Installation
settings
Colorimetry
settings
Maintenance
settings
9
Advertisement
