Information Menu; About The Preset Memory No - Sony Cineza VPL-HS50 Operating Instructions Manual

Sony video projector operating instructions
Hide thumbs Also See for Cineza VPL-HS50:
Table of Contents

Advertisement

Information Menu

The Information menu is used to display the horizontal and vertical
frequencies of the input signal, used time of the lamp, etc.
Picture
Signal
Function
Installation
Setup
Information
Item
fH
fV
(Memory No.)
(Signal type)
Lamp Timer
Note
You cannot change the displays above.

About the Preset Memory No.

This projector has 32 types of preset data for input signals (the preset memory).
When the preset signal is input, the projector automatically detects the signal
type and recalls the data for the signal from the preset memory to adjust it to
an optimum picture. The memory number and signal type of that signal are
displayed in the Information
You can also adjust the preset data through the Signal
This projector also has 20 types of user memories for Input-A into which you
can save the setting of the adjusted data for an unpreset input signal.
When an unpreset signal is input for the first time, a memory number is
displayed as 0. When you adjust the data of the signal in the Signal
it will be registered to the projector. If more than 20 user memories are
registered, the newest memory always overwrites the oldest one.
See the chart on page 55 to find if the signal is registered to the preset memory.
Note
When the aspect ratio of input signal does not match the screen size, a part of the screen
is displayed in black.
fH :
33.75kHz
fV :
60.00Hz
No.7
1080/60i
Lamp Timer :
10H
Exit:
Sel:
Description
Displays the horizontal frequency of the input signal.
Displays the vertical frequency of the input signal.
Displays the preset memory number of the input signal.
Displays the type of the input signal.
Indicates how long the lamp has been turned on.
Memory No.
Signal type
menu.
menu.
menu,
43
Information Menu
GB

Advertisement

Table of Contents
loading

Table of Contents