Step 3: Adjusting The Picture Size And Position - Sony Cineza VPL-HS50 Operating Instructions Manual

Step 3: Adjusting the Picture Size and
Position
Project an image on the screen and then adjust the picture position.
Tip
The I/1 (on/standby), INPUT, MENU, and M/m/</,/ENTER (joystick) buttons on
the side panel of the projector function the same as those on the remote control.
Note
Depending on the installation location of the projector, you may not control it with the
remote control. In this case, point the remote control to the screen instead of the
projector.
1
Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
ON/STANDBY indicator
LIGHT INPUT
DYNAMIC STANDARD CINEMA
PICTURE MODE
USER 1 USER 2 USER 3
ENTER

Step 3: Adjusting the Picture Size and Position

Adjusters 7
4
Remote control detector
2
Lights in red.
ON/
STANDBY
5
6
17
GB