Table of Contents
Advertisement
To quit the connection
Log off the computer, or press the ENTER
key on the remote commander.
For the configuration on the computer, refer
to the help or the Microsoft website.
28
Projecting a Streaming Video Delivered via a Network—Video Streaming
Projecting a
Streaming Video
Delivered via a
Network—Video
Streaming
Before starting
• Check that the projector and a computer are
connected over a network.
• There are precautions on use of the Video
Streaming feature. See "Use of Video
Streaming" in "Precautions" on page 7
before you start using this feature.
Configuring the Settings on
the Computer
• Install Windows Media Encoder in the
connected computer before using this
feature. You can download Windows
Media Encoder, free of charge, from the
Microsoft website.
• Before configuring the projector settings,
you should start Video Streaming on the
computer.
For the configuration and operation of
Window Media Encoder, refer to the help or
Microsoft website.
Configuring the Settings on
the Projector
1
Press the NETWORK key on the
remote commander.
The input signal setting is set to
"Network."
2
Press the
v or V
key to select "Switch"
then press the ENTER key.
The Switch dialog box is displayed.
Advertisement
Table of Contents
