Table of Contents
Advertisement
Configuring the Common
Setting Items
Input the Projector Name and set whether or
not to require input of a Password to operate
the Windows Vista® Network Projector
feature.
1
Press the MENU key on the remote
commander to display the menu.
2
Press the v/V/b/B key to select "To
Network Setting" in the Network
Setting menu then press the ENTER
key.
The Network Setting menu appears.
Network Setting
Wired Network
IP Address Setting
IP Address
Wireless Network
Subnet Mask
Common Setting
Default Gateway
Primary DNS
Secondary DNS
Select:
3
Press the v or V key to select
"Common Setting" then press the
ENTER key.
The Common Setting menu appears.
Common Setting
Projector Name
SonyProj9980B8
Projector Password
Not required
Initialize Network Setting
Select:
4
Enter the necessary items using the v/
V/b/B key and ENTER key.
The on-screen keyboard appears when
the menu prompts you to enter
characters and numerals, etc.
For the procedure for using the on-
screen keyboard, see "Using the On-
Screen Keyboard" on page 23.
Auto (DHCP)
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Set:
Exit:
Close
Set:
Exit:
Configuring the Network Settings Using the Menu
5
Select "Close" then press the ENTER
key when all items are entered.
The Network Setting menu is restored,
and the entered settings are displayed.
6
Press the MENU key to quit the
setting.
21
Advertisement
Table of Contents
