Table of Contents
Advertisement
6
Configure the settings on the
connected computer.
Open the [Wireless Network
Connection] menu on the computer to
select the same network as that
displayed under "Network Name
(SSID)" in the menu in step 5.
The connection between the projector
and the computer has been made and the
IP Address of the projector is displayed
under "Network Address."
®
Windows Vista
Network Projector
Network Name (SSID):
SonyProj2EA509
Projector Name:
SonyProj99808B8
Network Address:
169.254.163.130
Projector Password:
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
Windows Vista
®
.
Note
It may take about one minute to obtain an
IP Address.
Configuring Using "Simple
Setting" for Wireless Access
Point Connection
Before starting
SSID, Encryption Key, etc. is required to be
entered according to your wired Lan
environment. Consult your network
administrator.
Note
Some security systems such as 802.1x
Authentication cannot be set with Simple
Setting. Use the menus of the projector to set
such security systems.
1
Press the NETWORK key on the
remote commander.
The following menu appears:
Detail Information
Switch
Select:
Set:
Making a Wireless Connection with a Computer
®
Windows Vista
Network Projector
Projector not connected to network.
Set the Network setting
with Simple Setting or the Menu.
2
Press the v or V key to select "Simple
Setting" then press the ENTER key.
The message "Simple Setting started."
appears on the screen.
3
Press the B key.
The following menu appears:
Simple Setting
Use Wireless network.
Select the Network Mode.
Ad-hoc
Access Point
Prev.:
Next:
4
Press the v or V key to select
"Wireless Access Point" then press the
B key.
The access point select menu appears.
Simple Setting
Select access point.
SSID 01
SSID 02
SSID 03
Prev.:
Next:
Note
It may take some time to detect an access
point.
Simple Setting
Detail Information
Switch
Select:
Set:
Select:
Exit:
Select:
Exit:
17
Advertisement
Table of Contents
