HP 280 G2 Small Form Factor Business Product End-Of-Life Disassembly Instructions page 9

Table of Contents

Items Requiring Selective Treatment1
Tools Required2
Product Disassembly Process2
Step 1: Release the Screw on the Access Panel2
Step 2: Remove Access Panel from the Unit3
Step 3: Remove Front Bezel from the Unit3
Step 4: Remove the Heat Sink Cover from the Unit4
Step 5: Remove HDD / ODD Cable from the Unit4
Step 6: Remove ODD from the Unit5
Step 7: Remove HDD Cage from the Unit5
Step 8: Remove HDD from HDD Cage5
Step 9: Remove PCA Power Cable and System Fan Cable from PCA6
Step 10: Take out PCA from Unit6
Step 11: Remove Cooler from PCA6
Step 12: Remove Memory from PCA7
Step 13: Take off PSU and System Fan from the Unit7
Step 14: Open the PSU and Take off the PSU Fan7
Step 15: Take off PCA from the PSU8
Step 16: Take off CAP Using Electric Iron8