Watching Tv - Sony KDP-57WS655, KDP-51WS655 Operating Instructions Manual

Watching TV

z
For a complete list of all
the functions of the remote
control, see pages 47-53.
56
To Do This ...
Activate the remote control to
operate the TV
Turn on/off the TV
Tune directly to a channel
Adjust the volume
Mute the sound
Alternate back and forth
between two channels
Display the current channel
number, current time, current
Wide Mode, and program
information banner (if set)
Switch the TV's input to the
VCR, DVD player, or other
connected equipment
Change video and audio
options, customize the TV's
setup, set parental controls, and
more
Switch the TV's input between
sources connected to the TV's
VHF/UHF and CABLE inputs
Do This ...
Press TV FUNCTION
Press TV POWER
To tune to analog channels, press
then ENT.
For digital subchannels, press 0-9,
press 0-9 again, and then
For example, to select subchannel 21.13,
press 2+1+ +1+3, and then press ENT.
✍
You can also select channels using the
program guide. See pages 57 for
details.
Press VOL +/-
Press MUTING (to unmute, press
again or VOL +)
Press JUMP
The TV alternates between the current
channel and the last channel tuned.
Press DISPLAY. Press DISPLAY
the display off.
Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the
TV's video inputs.
MENU
Press to display the Menu. For
details, see "Using the Menus" on
page 83.
Press ANT to alternate between sources
connected to the TV's VHF/UHF and
CABLE inputs.
0-9 and
,
ENT.
MUTING
again to turn