MSI MS-98L2 Manual page 18

Hardware Setup
5. Secure the load lever with the hook
under the retention tab.
7. Press the four hooks down to
fasten the cooler. Turn over the
motherboard to confirm that the
clip-ends are correctly inserted.
Important
• Confirm if your CPU cooler is firmly installed before turning on your system.
• Do not touch the CPU socket pins to avoid damage.
• Whenever CPU is not installed, always protect your CPU socket pins with the
plastic cap covered.
• Please refer to the documentation in the CPU cooler package for more details
about the CPU cooler installation.
• Read the CPU status in BIOS.
2-6
6. Make sure the four hooks are in
proper position before you install
the cooler. Align the holes on the
motherboard with the cooler.
Push down the cooler until its
four clips get wedged into the
holes of the motherboard.
8. Finally, attach the CPU Fan cable
to the CPU fan connector on the
motherboard.