Introduction - MASSEY FERGUSON 4600 Series Service Manual

1.1 Introduction

1.1.1 The service manual
Read the table of contents and basic layout. Become familiar with all parts of this service manual. This
service manual gives the technician very important information.
Machine movement when in normal use determines right-hand and left-hand.
This manual covers general safety practices for this machine.
The photos, illustrations, and data used in this manual were current at the time of printing. Inline
production changes can make machines vary from the information in the service manual. The manufacturer
reserves the right to redesign and change the machine as necessary without notification.
WARNING:
In some of the illustrations and photos used in this manual, shields or guards may have
been removed for clarity. Never operate the machine with any shields or guards removed.
If the removal of shields or guards is necessary to make a repair, they must be replaced
before operation.
1.1.2 Replacement parts
To receive prompt efficient service, remember to have the following information:
Correct part description and part number
Model number of the machine
Serial number of the machine
1.1.3 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given
in millimeters for metric hardware and inches for US hardware.
1.1.4 Machine identification
Each machine is identified by a model and a serial number.
Record these numbers in the spaces given.
Give the model number and serial number to your dealer when parts or service are required.
Machine model number:
Machine serial number:
Date of delivery:
Dealer name:
Dealer address:
Dealer telephone number:
Dealer e-mail address:
Dealer fax number
4608 / 4609 / 4610 Service Manual
4283492M3
1. Introduction
1-3