Download Print this page

HP Compaq dx1000 Microtower Product End-Of-Life Disassembly Instructions

Hide thumbs Also See for Compaq dx1000 Microtower:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
Compaq dx1000 Microtower PC
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
The QTY may vary from different PSU Models
system fan, cooler
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
1
0
0
0
0
2
0
0
2
0
0
Page 1

Advertisement

loading

Summary of Contents for HP Compaq dx1000 Microtower

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 1.3 Markings for plastic parts greater than 25 grams Plastic Part Weight ISO 11469:2000 Plastic Part Optional: Plastic Part Name Description (grams) Mark Photo Alamo Main Bezel Main front bezel piece >ABS<...
  • Page 3 1 Remove cover from the unit Rotate screw to open the cover 2 Remove all the cables from PCA Press the button to pull power cords off Pull the other cords off PCA 3 remove PCI & PCI-E card from the PCA Use screw driver to take off the screw as shown in the photo EL-MF877-00...
  • Page 4 3 Take PCI & PCI-E cards off the PCA Use one hand to push the white plastic use the other hand to pull off the card 4 Remove HDD from the system Rotate the screw driver to take off the HDD holder 5 Take off Front Panel Pull the button up and then take off the front panel EL-MF877-00...
  • Page 5 6 Take off ODD Use one hand to pull the steel up , and the same time take off ODD use the other hand 7 Take off Cooler 7.1 Press the steel button to loose Cooler fan 7 Take off Cooler 7.2 Rotate screw driver to loose screw and then take the cooler off PCA EL-MF877-00...
  • Page 6 8 Take off CMOS battery Pull the battery holder as shown in the photo, and then the battery will be off the PCA 9 Take off PS from the Unit Use screw driver to loose screws and then take the PS off the Unit 10 Cut off wire tie EL-MF877-00 Page 6...
  • Page 7 11 open PSU 12 Use screw driver to separate the small PCA from the main board 13 Remove Electrolytic Capacitors 13.1 Electrolytic Capacitors 13 Remove Electrolytic Capacitors 13.2 Use the Soldering Iron to heat the solder of Electrolytic Capacitors and then remove it EL-MF877-00 Page 7 Template Revision B...
  • Page 8 EL-MF877-00 Page 8 Template Revision B PSG instructions for this template are available at EL-MF877-01...