Advertisement
OBJ_DOKU-2473-001.fm Seite 2 Dienstag, 16. Dezember 2008 8:43 08
VTL120
6.2. Head to body
1. Turn head to open position.
2. Position head so indicator is
facing user.
3. Screw on head, ensuring lugs
and slots engage as collar is
tightened.
6.3. Lockshield valve
1. Install the lockshield valve opposite from thermostat
London Office
Honeywell Control Systems Ltd.
Honeywell House
Arlington Business Park
Bracknell, Berkshire RG12 1EB
T (0 13 44) 65 60 00
F (0 13 44) 65 62 40
www.honeywell.com/uk
7. Adjustment / Setting of thermostat
The VTL120 is adjustable by turning the top anti-clockwise to increase
temerature setting or clockwise to decrease temerature setting.
closed
0
5
6
0
These temperatures are for guideance only and are based on vertical
mounting on the flow pipe. If the radiator thermostat is installed in any
other direction then the temperature will vary by 1°C to 2°C.
NOTE:
Heating can freeze when thermostats with zero position are
set at position „0".
8. To shut off the lockshield valve
1. Unscrew and remove
cover cap.
2. Turn the spindle clockwise
till stop by using a pliers
3. Fit cover cap.
9. Service
9.1. Decorator cap
When removing the radiator
for any reason the decorators
cap supplied with the valve should be used to isolate the flow.
9.2. Servicing
Use the service tool WV108M for cle-
aning or replacement of the valve
seating without draining the system.
For further informations see seperate
manual.
10. Disposal
Observe the local requirements regarding correct waste recycling/dis-
posal!
EN2H-2125GE23 R1208
December 2008
© 2008 Honeywell International Inc.
Subject to change without notice
Manufactured for and on behalf of the Environmental and Combu-
stion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A.
La Pièce 16, Switzerland or its authorized representative.
6°C
8°C
12°C
16°C
20°C
*
1
2
3
1
3
23°C
26°C
•
5
6
5
5
6
0
Advertisement
