To Remove The Front Panel - HP E1433A User Manual

To remove the front panel

1
Remove top cover, see "To remove the top cover." Gently disconnect cables from the printed
circuit assemblies. Using a T-8 torx driver, remove the two screws that attach the handles to the
assembly. Pull out the handles making sure not to lose the two spacers.
2
Using a T-8 torx driver, remove the screw that attaches the front panel to the bottom cover.
Gently pull the front panel off.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HP E1433A User's Guide
Replacing Assemblies
10-15