Advertisement
Bracing (continued.)
Assemble bracing bar(s) onto enclosure ; do not tighten clamps at this time. Lightly mark bracket
positions on panels. Align / plumb & mark wall bracket hole positions, drill, plug & mount wall
bracket.
(2)
Refit glass bracket(s) & tighten all glass clamp screws (1)
(1)
Assemble bars(s) & tighten all bar clamp screws (2).
Fit cover caps where applicable.
Working from top or bottom, press in cover section(s).
Fit cover caps to tops of profiles.
D
(2)
(1)
Advertisement
