Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lakes Bathrooms Manuals
  4. Enclosure
  5. Coastline Series
  6. Installation & maintenance instructions manual

Lakes Bathrooms COASTLINE Series Installation & Maintenance Instructions Manual

90 side panel
Hide thumbs Also See for COASTLINE Series:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
COASTLINE 90° SIDE PANEL
Installation / Maintenance Instructions
Rev 12.13
Shown with Pivot Door for illustration purposes.

Advertisement

loading

Related Manuals for Lakes Bathrooms COASTLINE Series

Summary of Contents for Lakes Bathrooms COASTLINE Series

  • Page 1 COASTLINE 90° SIDE PANEL Installation / Maintenance Instructions Rev 12.13 Shown with Pivot Door for illustration purposes.

  • Page 2: Important Notes

    However should maintenance be required it should be carried out by a competent person with reference to these instructions. Before any work is carried out the root cause of the problem must be identified. Lakes Bathrooms service engineers are available if necessary to consult / carry out remedial work. Call Lakes Bathrooms HELPLINE.

  • Page 3: Supplied Parts

    SUPPLIED PARTS : Cover Section (for corner post ONLY) 1x (see fig C) Top Cap (corner profile) Handed pair Side Panel Assembly Top Cap (vertical frame) 3,5 x 10 pan head self tapping screw...
  • Page 4 SIZE Adjustment A Wall Profile Tools Required Position ‘X’ 700 (070) 670—700mm 685mm Spirit Level (with vertical ‘bubble’) 750 (075) 720—750mm 735mm 800 (080) 770—800mm 785mm Tape Measure 900 (090) 870—900mm 885mm Pozidriv Screwdriver Power drill & 1000 (100) 970—1000mm 985mm 8mm masonry bit Pencil...
  • Page 5 INSTALL DOOR & SIDE PANEL (refer also to door fitting instructions). PLUMB, AFFIX FRAMES, COVER PROFILES & CAPS. Carefully lift side panel onto tray & engage corner profile onto door frame. Manipulate door & side panel in wall mounts until plumb (check vertical & horizontal frame members).
  • Page 6 SEALING Use of good quality silicone sealant & cleaning / degreasing of all joint areas is recommended. Apply continuous silicone sealant bead EXTERNALLY ONLY...

  • Page 7: Basic Troubleshooting

    In the unlikely event of an enclosure leak, water will be visible on the outside of the enclosure itself, or around the perimeter joints ONLY. Water / moisture appearing outside this area (ie at floor level) is normally due to incorrect tray installation. Service : Northern Ireland Lakes Bathrooms Ltd Ian A Kernohan Alexandra Way Firtrees...