Advertisement
BASIC TROUBLESHOOTING :
Leakage :
The sealing method described in these instructions relies on a continuous seal being applied
between shower walls & tray before installing the enclosure (see fig A), it ensures a watertight
seal around the perimeter of the enclosure to the shower walls & tray.
In the unlikely event of an enclosure leak, water will be visible on the outside of the enclosure
itself, or around the perimeter silicone seal ONLY. Water / moisture appearing outside this area
(ie at floor level) is normally due to incorrect tray installation.
The foam seal provided on the wall profile will tolerate most grouted joints. If excessively deep joints
are present, & leakage does occur, additional silicone sealant may be applied over full length of wall
profile / wall joints.
Lakes
Bathrooms
Lakes Bathrooms Ltd
Alexandra Way
Ashchurch
Tewkesbury
Gloucestershire GL20 8NB
Service England, Scotland, Wales
8.30am—5pm Mon ~ Thurs
8.30am—4.30pm Fri
Tel / HELPLINE : 01684 853870
Fax : 01684 857411
www.lakesbathrooms.co.uk
Email : admin@lakesbathrooms.co.uk
Service : Northern Ireland
Ian A Kernohan
Firtrees
Green Way Industrial Estate
Northern Ireland
BT23 7SU
8.30am—5pm Mon ~ Thurs
8.30am—4.30pm Fri
Tel : 02891 270233
Fax : 02891 270597
Email : info@iakonline.co
Conlig
Advertisement
