Advertisement
Tools Required
Tape Measure
Pencil
Good quality silicone
sealant & applicator
Lakes Coastline Walk In enclosures are fully reversible. Versatile construction permits their use
onto a wide range of base footprints, tray or wetroom installations.
Ensure tray / floor is level & that all base / wall joints are sealed & cured over entire length of
A
Setting Out :
Fitting to Tray ~ To ensure enclosure is situated entirely on the flat surface of the tray rim,
wall profiles should be mounted a minimum of 18mm inboard of tray edges.
Wetroom ~ Enclosure may be sited as desired in relation to wet area
(within size range of product).
Wall profile orientation : Foam seal outermost (away from wet area).
Measure, plumb & mark wall profile positions, drill, plug & affix wall profiles.
Spirit Level (with vertical ―bubble‖)
Power drill &
8mm masonry bit
3mm HSS
drill bit
sides (See Fig A) prior to fitting enclosure.
Ensure continuous silicone
sealant bead between tray
(base) & all walls before fitting
wall profiles.
Pozidriv Screwdriver
Hacksaw
Dia 4 x 45 lg
2,5mm Hexagon
(Allen) Key
Foam
Seal
Advertisement
