Features - Sony JumboTron JTC-C200 Operating Instructions Manual

Features

JTC-C200 ICU controller
JTC-P200 ICU (Image Control Unit)
JTA-LS200 ABC sensor unit
8
Overview Overview
The JTC-C200 ICU controller is the remote controller for the JTC-P200
ICU (Image Control Unit) which controls the images on the JumboTron
screen. Using the ICU controller, you can control the ICU from a control
room at a distance of up to 500 m (1640 feet). The main functions of the
JTC-C200 are as follows:
Turning on/off the ICU and screen
You can turn the ICU and the JumboTron screen on and off.
Selection of screen display mode
You can select the images to be displayed on the JumboTron screen from
among three modes: INPUT 1 (video images), INPUT 2 (computer
graphics) and MIX (mixed images).
Adjustments of the images on the screen
You can adjust the brightness, hue, color and sharpness of the images on
the screen.
The brightness can be automatically adjusted according to the ambient
light with the JTA-LS200 ABC sensor unit. You can also set the desired
brightness level manually, and four brightness levels can be stored in the
memory and recalled at a touch.
The JTC-P200 controls the images on the JumboTron screen.
The JTA-LS200 ABC (Automatic Brightness Control) sensor unit
connected to the ICU senses the ambient light for the automatic brightness
control.